Proper signaling is crucial for communicating your intentions to other drivers. Activate your right turn signal upon approach and keep it active until you have fully exited the roundabout.

Before entering the roundabout, drivers must prioritize traffic already circulating from their left. It is mandatory to yield to these vehicles to ensure a safe entry.

For taking the second exit (straight ahead), early lane selection is key. Drivers should position their vehicle in the lane that will allow them to smoothly enter their intended lane once past the roundabout.

To clearly indicate your departure when going straight through a roundabout, activate your right turn signal immediately after passing the first exit. This informs other drivers of your imminent exit.

For taking a left turn (3rd or 4th exit) at a roundabout, drivers should position their vehicle in the leftmost lane upon approach, or follow any specific lane arrows on the road.

Once inside the roundabout and positioned for a left turn, drivers should maintain their lane discipline throughout their circulation. This ensures predictable movement and safety.

To indicate an exit when turning left, activate your right turn signal after passing the previous exit (either the 2nd or 3rd) that precedes your intended departure. This informs other drivers of your exit intention.

Before initiating your exit from the roundabout, especially after circulating for a left turn, it is crucial to confirm that no vehicles are to your right. This prevents potential collisions as you move towards the exit.

For the 2nd exit in a two-lane roundabout, drivers are required to position themselves in the right lane. There is no need to use indicators when entering, but use the right indicator after passing the 1st exit and watch for blind spots.

When aiming for the 2nd exit in a three-lane roundabout, drivers should position their vehicle in the middle lane. Use the right indicator after passing the 1st exit and check for blind spots.

For the 3rd exit in a two-lane roundabout, drivers must enter using the right lane. When leaving, use the right indicator after passing the 2nd exit and check blind spots.

To take the 3rd exit in a three-lane roundabout, drivers should use the middle lane. When leaving, use the right indicator after passing the 2nd exit and watch for vehicles in blind spots.

For complete rounding (4th exit) in a two-lane roundabout, drivers must use the left lane. Upon exiting, use the right indicator after passing the 3rd exit and be aware of blind spots.

For the 4th exit (complete rounding) in a three-lane roundabout, drivers are required to use the left lane. When exiting, use the right indicator after passing the 3rd exit and diligently watch for vehicles in blind spots.

Roundabouts are designed for traffic to circulate in an anticlockwise direction, ensuring a consistent and predictable flow for all drivers.

Always reduce your speed and select the appropriate lane well in advance when approaching a roundabout. This prepares you for entry and safe navigation.

Mandatory signs at a roundabout provide essential guidance for lane usage and direction. Drivers must adhere to these instructions and reduce speed for safe entry.

This marking serves as an advance warning, alerting drivers to an upcoming roundabout. It signals the need to reduce speed and prepare for roundabout rules.

Roundabout warning road markings are typically placed on the road surface before the entrance to the roundabout, indicated by white markings, to provide advance notice to drivers.

When intending to take the first exit (turning right) at a two-lane roundabout, drivers are required to position their vehicle in the rightmost lane for a safe approach and exit.

To clearly indicate your exit when proceeding straight (2nd exit) through a roundabout, activate your right turn signal immediately after passing the first exit.

For taking a left turn (3rd or 4th exit) at a two-lane roundabout, drivers should position their vehicle in the leftmost lane upon approach.

When exiting a roundabout, especially at the first exit, drivers must stop and yield to pedestrians who are using or are about to use the crossing.

Before entering the roundabout, drivers must prioritize traffic already circulating from their left. It is mandatory to yield to these vehicles to ensure a safe entry.

Proper signaling is crucial. Activate your right turn signal as you prepare to exit and keep it active until you have fully cleared the roundabout.

When intending to take the 2nd exit in a three-lane roundabout, drivers should position their vehicle in the middle lane.

When exiting a roundabout, especially from the 2nd exit, always be aware of vehicles that may be in your blind spots. Check mirrors and turn your head to ensure safety.

To take the 3rd exit in a two-lane roundabout, drivers should approach using the right lane.

For taking the 3rd exit in a three-lane roundabout, drivers should approach using the middle lane.

To signal your departure for the 3rd exit, activate your right turn indicator immediately after passing the 2nd exit to inform other drivers of your intention.

For the 4th exit (or complete rounding) in a two-lane roundabout, drivers should position their vehicle in the left lane upon approach.

To signal your departure for the 4th exit, activate your right turn indicator immediately after passing the 3rd exit, informing other drivers of your imminent exit.

Even in busy roundabouts, the fundamental rule is to yield to circulating traffic. Drivers must wait for a safe gap to enter without impeding flow or causing a hazard.

If you are in the correct lane (often the right lane for straight-through), maintain your position. The primary rule is always to yield to vehicles already circulating within the roundabout before entering.